AS1933/43

Energy$ense™ High Voltage Digital DC-DC Power Managers with Triple Synchronous Bucks

NOT RECOMMENDED FOR NEW DESIGNS

Part of the Akros AS19xx Energy$ense™ product family, the AS1943/AS1933 are highly integrated, high efficiency triple output Synchronous Buck PMICs (Power Management ICs) for wide input voltage range (3-27Vin), cost and space sensitive system power applications.

Three power outputs are provided; a 3-27V input Synchronous Buck Controller that provides power design flexibility, and, two Synchronous Buck Regulators with internal power FETs. All three outputs provide independent delay and soft start timing control and automatically manage both standard and pre-biased power startup. Synchronous spread-spectrum clocking with external PWM clock sync capability is built in for low-noise, low-EMI multi-channel applications.

The AS1943/AS1933 are optimized for high-efficiency, cost and space constrained multi-channel applications. The device family simplifies power system design with a range of programmable and easy-design features, including system noise and EMI management. Both the AS1943 and AS1933 provide Hardware mode pin controlled operation, and the AS1943 also includes enhanced Software controlled features through an I²C interface.

The AS1943 & AS1933 are available in 5x5mm 32-pin QFN RoHS compliant packages.

Applications

  • Residential Gateways and Femto Cells
  • Wireless LAN & WiMAX access points/CPEs
  • IP and DECT Base-stations, Ethernet Switches
  • Voice-over-IP (VoIP) phones, CCTV
  • Set-Top Box, PVR, DTV, LCD
  • Infotainment and Automotive accessories
  • Intermediate Bus and Point of Load applications
  • Tablets, Thin Clients and Netbooks

Features

Digitally Programmable Power

  • Output 1: High Efficiency Synchronous Buck Controller (3-27V input)
  • Outputs 2 & 3: High Efficiency Synchronous Buck Regulators with Integrated 2A(rms) Power FETs
  • Synchronized PWM Clocking on all Outputs (pin programmable)

Power Management

  • Pin Programmable Current Limit for each Output
  • Automatic Pre-Bias Output Startup Management
  • Per Output Enable & Soft Start Delay Timing Control
  • Multiple Soft Start Control Applications Supported
    - Independent, Ratiometric, or Coincident
  • Global PGOOD Monitoring
  • Synchronous Spread Spectrum Clocking on all PWMs
  • Input for Optional External Synchronization of PWMs
  • Pin Programmable UVLO
  • Pin Controlled Standby Mode
  • Per Converter Input Current Measurement (AS1943)
  • Per Output PGOOD Monitoring (AS1943)
  • Per Output Voltage Margining (AS1943)
  • Per Output CCM/DCM Control (AS1943)
  • Over-Temp Monitoring (AS1943)
  • 5V µC-Compatible I²C Interface (AS1943)

EMC Compliance and Protection

  • Synchronous Spread Spectrum Clocking on all PWMs
  • Over-Current, Under/Over-voltage and Short-Circuit Protection with Hiccup Mode
  • High-Temperature Warning, Shutdown, and Restart
  • Industrial Temperature Range: -40C to 85C

Block Diagram

AS1943_33

 

Documentation